| Layer | CTI |
| Direction | From CallGem |
| Type of Service | CG |
| Interface ID | CT |
| Message Purpose | This message tells the CTI layer to transfer the connected call to a specific agent. |
| Example | CT\TDdefault\CNCustCare\AN2\AE42\TI26 |
| Explanation | CallGem is requesting that the connected call on trunk 26 be put through to the agent with identifier number 2 at extension 42, on the CustCare campaign. |
| Notes |
| Parameters | ||||||
|---|---|---|---|---|---|---|
| Code | Name | Type | Mandatory? | Min Val | Max Val | Description |
| A2 | AgentTransferee | string | false | 1 | 80 |
The transferee Agent or destination address. User defined parameter values may include any characters except / \ : * ? " < > | & % + ! ' ; |
| AE | AgentExtensionIdentifier | string | true | 1 | 120 | Required by the telephony layer to give each agent extension a unique identifier. |
| AN | AgentIdentifier | string | false | 1 | 80 | User defined parameter values may include any characters except / \ : * ? " < > | & % + ! ' ; |
| AS | ApplicationSpecificData | string | false | 1 | 4000 | Application Specific parameter |
| BL | BlindTransfer | boolean | false | 0 | 0 | Blind transfer. Indicates whether the transfer is unscreened i.e. the transfer occurs as a redirect. The recipient may or may not be in a position to receive the call. |
| C3 | Conference3 | boolean | false | 0 | 0 | 3 Party conference flag. Setting this parameter turns the transfer into a 3-party conference |
| CL | CallingLineIdentity | string | false | 1 | 80 | From V10.6.255 - The CLI to be presented when this number is dialed. Any value passed here must be a valid address terminating to your equipment. |
| CN | CampaignName | string | true | 1 | 80 | User defined parameter values may include any characters except / \ : * ? " < > | & % + ! ' ; |
| QT | QueueTimeout | int | false | 1 | 999999 | This parameter is numeric and has a valid range of values between 30 + 600. |
| RI | RingTimeout | int | false | 1 | 600 |
Value range is from 12 to 600 seconds.
This parameter sets the Ring No Answer timeout for a transfer recipient. It is only set as a result of the RI parameter being set on the TR message. |
| SA | SpoofAgent | boolean | false | 0 | 0 | If specified, along with an agent extension, indicates that an agent is to be spoofed for the transfer |
| SI | SessionIdentifier | string | true | 1 | 120 | Session Identifier parameter |
| TD | TenantDescriptor | string | false | 1 | 80 | This parameter is alphanumeric and identifies to which tenant this message applies. |
| TI | TrunkIdentifier | string | true | 1 | 80 | Originated by the telephony layer to identify a particular call and must be unique for the life of that call. Identifier can be reused either after a Now Disconnected [ND] message has been received (if requested in the Trunks Open [TO] message), or a Call Disconnect [CD] message (if not). |
| WD | WarDial | boolean | false | 0 | 0 | War dial |
CONTACT SYTEL